Opuslay — tile pattern layout calculatorOpuslay
Esta página também existe em português, para Brasil & Portugal — ver a versão em português.

1x6 Kit-Kat Mosaic Sheet (on 12x12 Mesh) Tile Pattern Calculator

This layout sets 1x6 chips pre-mounted on 12x12 mesh sheets, 24 chips to a sheet. It belongs to the Mosaic family — see 2x2 Square Chip Mosaic Tile Sheet for the reference layout.

Kit-Kat Mosaic Sheet

Opuslay — tile layout worksheet
Room:
3 m × 2.5 m
Units:
Metric (cm / m²)
Anchor:
Left · Top
Layout angle:
Straight
Tile colours:
Single colour

Material breakdown

Kit-Kat Mosaic Sheet material breakdown for a 3 m × 2.5 m room
FormatQty / PatternShareQty / RoomArea / Room
29.6x30 cm1100.0%997.50 m²
Total1100%997.50 m²

What you'll need to buy

Sheets to buy

29.6x30 cm95 sheets8.44 m²

Total 95 sheets · 8.44 m² (incl. 12% cuts & breakage)

Adhesive & grout

  • Thin-set adhesive: ≈ 19.1 kg (1 × 50 lb bag) — recommended trowel: 5mm V notch
  • Grout — mosaic sheets use far more than flat tile:
    • ≈ 9.9 kg (1 × 25 lb bag) — dense mosaic joint network

Adhesive: allow a little over on an uneven substrate, or if you back-butter large tiles — both eat more than a flat bed.

Grout: the 25 lb bag is the usual size (10 lb for small jobs). Buy it in one go and stick to a single bag size: bags from different batches can dry to slightly different shades.

About 14% of the surface is joint, set by the sheet mesh — the calculator sizes grout for that dense network, not a flat-tile rate. Assumes 6mm tile depth; thicker tiles need more.

Only need the grout figure? Open the grout calculator →

See the square chip mosaic sheet (2x2 chips on a straight grid)See the herringbone mosaic sheet (1x3 chips already set at 45 degrees)See the 1x1 chip mosaic sheet (144 square chips per sheet)See the micro chip mosaic sheet (half-inch chips, 576 per sheet, the most grout of the family)See the mini brick mosaic sheet (rectangular chips in a half-offset running bond)