36x36 (Straight/Stack Bond) Tile Pattern Calculator
This layout sets a single 36x36 tile on a repeating 36x36 module. The same tile sizes are laid to a different module in 36x36 (Running Bond, 1/3 Offset) Tile Pattern.
One-Tile Pattern — 36x36 (Straight/Stack Bond)
Opuslay — tile layout worksheet- Room:
- 3 m × 2.5 m
- Units:
- Metric (cm / m²)
- Anchor:
- Left · Top
- Layout angle:
- Straight
- Tile colours:
- Single colour
Material breakdown
| Format | Qty / Pattern | Share | Qty / Room | Area / Room |
|---|---|---|---|---|
| 90x90 cm | 1 | 100.0% | 12 | 7.50 m² |
| Total | 1 | 100% | 12 | 7.50 m² |
What you'll need to buy
Tiles to buy
| 90x90 cm | 13 tiles | 10.53 m² |
Total 13 tiles · 10.53 m² (incl. 40% cuts & breakage)
Adhesive & grout
- Thin-set adhesive: ≈ 40.5 kg (2 × 50 lb bags) — recommended trowel: 12mm notch, large format
- Grout — the tile sets the joint width, not you:
- ≈ 0.8 kg (1 × 10 lb bag) — 3mm joint, rectified / tight-set tile
- ≈ 1.3 kg (1 × 10 lb bag) — 5mm joint, natural or non-rectified tile
Adhesive: allow a little over on an uneven substrate, or if you back-butter large tiles — both eat more than a flat bed.
Grout: the 25 lb bag is the usual size (10 lb for small jobs). Buy it in one go and stick to a single bag size: bags from different batches can dry to slightly different shades.
It's the tile that decides the joint, not the setter — dry-lay a section to find your width. Assumes 9.5mm tile depth; adjust for your product — thicker tiles need more.
Share & export
Save the One-Tile Pattern — 36x36 (Straight/Stack Bond) layout to your moodboard, or send the link to your tiler — it reopens with your room dimensions.
